Vibration Meters

The international community has recently drawn considerable attention to occupational vibration and it's detrimental effects on the human body. In response to these new developments, Quest has released the "New" HAVPro personal human vibration monitor. This personal human vibration monitor provides tri-axial vibration measurements for calculating hand-arm and whole body vibration exposures.

The HAVPro personal human vibration monitor  performs tri-axial vibration measurements of hand-arm and whole body vibration exposure from power tools, machinery and other occupational vibration sources.

Typical Applications Include:

Hand-Arm & Whole Body Vibration, Compliance Monitoring, Risk Assessment, Workers Compensation, Health Insurance, Product Liability, Engineering Controls Evaluation, Administrative Controls Evaluation, Exposure Profiling, Cause/Effect Analysis, Regulatory Enforcement, Machine Fault Detection

The VA-508C Vibration Option Kit includes all the accessories needed to obtain vibration measurements from any Advanced Series Sound Level Meter.

The included VI-90 Vibration Integrator buffers and converts the signal of the accelerometer in order to measure the three components of vibration – displacement, velocity and acceleration.

A slide switch on the VI-90 determines which component of vibration is being measured and displayed.

The conversion chart allows you to convert readings in dB on the sound level meter to displacement (meters RMS), velocity (meters/second RMS) or acceleration (g’s RMS).

For even more in depth studies, vibration measurements can be taken with full or 1/3 octave band filters if the meter is so equipped.